🚨LATEST PROJECT ALERT🚨 Our client brought his ute in with a well used canvas canopy, which was not providing a secure, water tight fit for his tray. Our team worked on a custom solution and once approved, our Technician, Jason, got to work making it come to life. All three doors were fabricated in our…
LOOKING GOOD AS NEW! This client contacted us regarding his well used Pantech Truck that required a much needed upgrade! We attended site and reviewed the vehicle before offering a free quote which was accepted within a few days so our team got to work! The first part of this project was completed onsite at…
Our talented team worked together to bring this engine box back to life! All panels were carefully removed from the trailer to begin the transformation; our Technicians did a full review of all walls and the roof to determine was parts could be saved and what would require replacement. The internal box section, parts of…
The MRU Team fabricated a custom Pole Racking System for our client who required a better storage solution for their large electrical poles. Our Technician’s cut and shaped 6 new steel uprights to existing structure before welding in plates to each upright in lower section to strengthen the structure. An engineers certificate plate was installed…
The CCTV Tri-pole collection is complete! All 5 poles have been fabricated by our talented Technicians; we sourced local suppliers to have them galvanised before powder coating them in the signature cottage green. The concrete bases were also built by our team here in the workshop; the forms have been welded together to ensure the…
Our latest project for the Moreton Bay Regional Council 🏗🦅 The MRU Team has worked hard to fabricate this custom base for the brand new Osprey nest supplied by @energex_au. The nest has been installed at the old Petrie Paper Mill location in order to provide a safe and secure nesting site for the Ospreys who currently…
This client needed a full fit out for his ute, so the team got to work! The old Toolboxes have been refurbished by sanding them down, rust treating and priming everything before a fresh coat of paint was done. Both Dropsides were shortened to suit, and Rubber Matting was installed inside each Toolbox. Two Work…
This was a big undertaking for the MRU Team but the results speak for itself! When this client contacted MRU, his Boat Trailer was looking worse for wear and unroadworthy. With a few shorts weeks until his mother had to move homes, the need to repair the trailer was quite dire as it holds a cherished…
Check out this latest project from MRU! Our client brought this Tipper in with severely rusted Dropsides from regular use. A free quote was provided within 24hours and after client approval the job was booked in a week later. Our Team got to work treating the rust and removing the inner panels of the Dropsides.…
The steel posts have been fabricated neatly & precisely to ensure the finished product is of high quality. Specialised pieces include a Collapsible Base, Winch Mounting Plate, Gussets & a Solar Panel Frame. The Camera Mounts have been customised to fit the required cameras and an important detail is the Climbing Prevention Spikes. The Aluminium…